AquaCo | Zero TDS Reverse Osmosis System | Autoclave

Description

AquaCo Zero TDS Reverse Osmosis Water Filter System for Autoclave Sterilization Machines.

• Ensure the highest quality steam for your sterilization process with our advanced Water Filtration System, meeting manufacturer-required water quality standards.
• Our advanced Water Filtration System, proudly assembled in Australia, incorporates components from reputable manufacturers in the USA, Taiwan, and the UK.
• All system components are Laboratory Tested and NSF Certified for material safety, meeting manufacturer standards.
• Our mechanical system operates seamlessly with water pressure (>35psi), eliminating the need for electricity and offering reliability and cost savings.

1st Stage: Sediment Filter: (Replace every 6-12 months)
100% Polypropylene Triple Gradient Sediment Filter. Captures sand, dirt, rust, algae, silt, mud and particles greater than 1 micron. Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only. *

2nd & 3rd Stage: Drop In and Inline Carbon Filter: (Replace every 6-12 months)
Coconut Shell Activated Carbon Media. Removes Chlorine Taste and Odour, and VOCs. Protects the membrane from Chlorine and Ammonia which can damage the membrane.
Removes THMs, TCEs, Pesticides, Disinfectants and other Organic Pollutants.
Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.

4th Stage: Reverse Osmosis Membrane: (Replace every 2 years) 
USA Made Dupont Filmtec Reverse Osmosis Ultrafine Membrane. Removes ions, heavy metals, endotoxins, microcystins. The pore size is less than 0.0005 micron (human hair is 70 microns).
Certified by NSF International against NSF/ANSI Standard 58 for material requirements only for safe use in drinking water applications.

5th & 6th Stage: Drop In and Inline DI Resin Filter: (Replace every 6-12 months)
For TDS reduction. Lowers Conductivity. De-ionizing resin to reduce the amount of dissolved salts and minerals in your water.

Specifications:

Casing size: 9″ x 2.5″

Faucet dimensions: 80mm W x 292mm H x 130mm D

Filter type: System

Filtration stages: 6

Flow rate: 3 LPM

Maximum pressure: 80 PSI

Operating pressure: 60 PSI

Operating temperature: 2°C – 38°C

System dimensions: 360mm W X 480mm H X 200mm D

Tank dimensions: (18L) 279mm W x 368mm H x 279mm D

Tank dimensions: (60L) 389mm W x 626mm H x 389mm D